Ensure the back of the deckhouse reaches this point exactly so everything forward of the deckhouse fits perfectly.
The helm is the same as used for the Program 5 CCB. A slight modification is necessary to use on the Tango boat. You must remove the four small triangular antenna base holders that are molded to both sides of the helm.
To ensure a proper fit of the new antenna bases place the commanders hatch in the open position then glue the bases so they do not interfere with the hatch.
Once the antennas are correctly placed glue the commanders hatch down in the closed position.
Place the helm on top of the deckhouse as shown here.
Add the rear gunners raised firing position, flag and light mast base, and 40-mm turret gun-stop.
Next add the bar armor supports around the outside edge of the deckhouse.
Assembly of the deckhouse gun turrets. You will need two 20-mm Cannons and a 40mm Grenade Launcher.
As an option, you can add 40-mm Grenade Launchers above the 20-mm Cannons as shown here.
Correct position of the gun turrets. The 40-mm Grenade Launcher turret is positioned on the raised-centerline base.
The guns stops are added as shown here for the 20-mm Cannons.
